Automatic cutting equipment with hot knife cutter
Hot Knife Cutter
Manufacturer of Hot, Cold and Ultrasonic Knife Cutter Systems
Hot Knife Cutter and Heat Sealing Systems
Cold Knife Cutter Systems
Ultrasonic Strip Cutter Systems
Heavy Duty Cold Knife Cutter Systems
Flexi Hot Cold and Ultrasonic Strip Cutter Systems
Hole Punching and Marking Systems
Hot Foil, Printing and Marking Systems
Angle Cutting Systems
Slack Feed Systems
Manual Web Cutting Machines
Cutter Systems Accessories
Cutter Systems Spare Parts
Cutter Systems Gallery
Contact Cutter Systems Manufacturer
Hot Knife Cutter
Hot Knife Cutter

Hot Knife Cutter and Heat Sealing Systems


Hot Knife Cutter and Heat Sealing Machine TYPE SC 430USP from SUHRHot Knife Cutter PRINT COPY

Setting and programming the machine for use is easily carried out as follows:

1. Mount the reel of strip material on the reel holder and thread it through the guide bars and in to the knife guide.
2. Turn the machine on.
3. Set the knife temperature and time delays to suit the material to be cut.
4. Programme the length required.
5. Programme the quantity required.
6. Wait until the blade reaches the required temperature.
7. Press the Manual Cut Button to establish the start datum.
8. Press the start button.

The machine will now measure and cut automatically and when the batch is complete or the material exhausted, the machine will stop and sound an alarm. The production rate achieved will depend upon the length to be measured and the properties of the particular material to be cut.

Technical Specifications 
Dim.: DxHxW33x44x54 cm.
Weight:20 kg
Cut Angle:90
Max. mat width125 mm
Max. mat. thickness5 mm
Mat. throughput speed50 cm/sec
Mains supply required220v/240v/450W
Compressed Air6 BAR
Heat Output315 W
  
Cutting Speeds 
Cut Length in mm Pieces cut per hour
1002100
500500
1000630


Front Page - Hot Knife Cutting Machines - Cold Knife Cutting Machines - Ultrasonic Knife Cutting Machines
Heavy Duty Cold Knife Cutting Machines - Flexi Hot, Cold and Ultrasonic Knife Cutting Machines
Hole Punching and Marking Machines - Hot Foil Printing and Marking Machines - Angle Cutting Machines - Slack Feeder Machines
Manual Web Cutting Machines - Cutting Machines Accessories - Cutting Machines Spare Parts - Cutting Machines Gallery - Contact

Copyright © 2004 Suhr A/S, Biskop Svanesvej 21, DK-3460 Birkerød, Denmark. CVR no.: 20 56 98 16.



Hot Knife Cutter